水上物流网为船舶与海洋工程行业提供技术支持与动力,是船舶行业最大门户分类网站
全国: | 上海:
水上物流产品分类
浮桥系泊系统(自支撑滑动系统)
产品图片
重要参数
    应用 浮桥

产品简介

martini marinas 的产品系列包括多种最先进的安全停泊解决方案。
得益于我们的技术,我们现在能够将任何地点,甚至是最难停靠的地点,连接到浮动码头。

我们的方法
初步分析对于正确安装系统至关重要,首先是系泊方式的选择。针对每个安装点、地点和气候条件,都需要进行深入的定制研究。

我们的专家团队将前往现场进行直接检查,为锚的定位提供基础数据。

客户提供的有关海床深度和形状、范围、风速和海浪运动性质的具体信息也会被考虑在内。

其他需要考虑的因素包括使用码头的船只的大小。

由此开始评估最佳系统及其大小。

停泊时使用镀锌钢链和混凝土沉降块,或使用打入海床的垂直杆,以及用于垂直滑动的坚固导向环。

马天尼游艇码头提供两种平行于岸边放置浮桥的解决方案:间隔杆或稳定性极高的自支撑滑动系统。

这样做的好处很多:安装快捷、备件回收方便,而且有维护计划。
从众多工程中积累的经验可确保客户获得最安全、最高效的锚固系统。

我们在设计和制造浮动码头和游艇码头专用设备方面拥有超过 45 年的经验。

英文介绍

MARTINI MARINAS RANGE INCLUDES SEVERAL STATE-OF-THE-ART MOORING SOLUTIONS FOR A SAFE HARBOUR.
Thanks to our technologies, we are now able to connect any point, even the most difficult ones, to the floating docks.

OUR METHOD
A preliminary analysis is essential for a correct installation of the system, starting with the choice of mooring. In-depth, customised studies are required for each installation, location and climatic condition.

Our team of experts will travel to the site to carry out direct inspections that will provide fundamental data for the positioning of the anchors.

Specific information provided by the client on the depth and shape of the seabed, range, wind speed and nature of the incoming wave motion will be taken into account.

Other factors to be taken into account are the sizes of the boats that will use the marina.

From here the evaluation of the best system and its sizing will start.

Mooring is carried out using galvanised steel chains and concrete sinkers blocks, or by means of vertical poles driven into the seabed, with rugged guide rings for vertical sliding.

To place a pontoon parallel to the bank, Martini Marinas offers two solutions: spacer rods or a self-supporting sliding system of great stability.

The advantages are many: quick installation, easy retrieval of spare parts, and a maintenance program.
The experience gained from so many works ensures the client the safest and most efficient anchorage system.

We are an organisation with more than 45 years of experience in designing and manufacturing the floating jetties and the equipment expressly intended for the marinas.