产品简介压缩机应安装在高于最高水位 1 米高的高架、有盖和受保护的地方。 固体体和颗粒不得吸气。 因此,建议将过滤器连接到入口。 必须提供正确的电气连接,否则水可能会通过鼓风机吸入。 正确的旋转方向由身体上的箭头指示。 整个空气管道和软管网络必须从压缩机向分销商撤离,以防止冷凝水中的水袋。 让我们为您的孵化场或养鱼场制定精确详细的报价。 只需向我们发送一个尺寸的草图,显示池塘和储罐的布局和大小(长度、宽度和深度),以及环形压缩机的计划位置。 当扩散器的浸入深度小于上方时,每小时容量会增加。 可用型号为 0.25 kW 至 2.2 kW、三相或纯交流电,请根据要求指定。 英文介绍The compressors should be installed in an elevated, covered and protected place up to 1 m above the maximum water level. Solid bodies and particles may not be aspirated. Hence it is advisable to connect a filter to the inlet. It is essential to provide correct electrical connections as water may otherwise be sucked through the blower. The right direction of rotation is indicated by an arrow on the body. The entire network of air pipes and hoses must drop away from the compressor towards the distributors to prevent water pockets from condensation water. Let us work out a precisely detailed offer for your hatchery or fish farm. Just send us a dimensioned sketch showing the lay-out and size (length, width and depth) of the ponds and tanks in relation to each other as well as the planned site of the ring compressor(s). When the immersion depth of the diffusers is less than above, the hourly capacity increases. Available variants from 0.25 kW to 2.2 kW, three-phase or pure alternating current, please specify on request. |
易操作2臂移动船坞除尘器(多功能工业抽气机) |
2023-12-21
|
查看详情 >> |
国产切割台(30X 30MM) |
2023-09-25
|
查看详情 >> |
CNC数控复合纤维织物切割台(船坞自动化切割) |
2023-09-26
|
查看详情 >> |
帆布制作缝纫机COASTAL-250(适合缝制针号为130-180的中等重量帆) |
2023-10-31
|
查看详情 >> |
船坞剪刀ARAMID(适用于轻薄材料) |
2023-10-12
|
查看详情 >> |