产品简介

有不同的配置，适用于聚酯、酚醛和环氧树脂，是高级闭模应用的理想选择

MkVI RTM系统有三种配置：聚酯、酚醛和环氧树脂。该装置是高级闭模应用的理想选择。这些系统根据使用的材料有多种泵的选择。

适用于混合和注射聚酯、乙烯基酯、甲基丙烯酸酯和环氧树脂系统。

催化剂比例可以从1.0%到50%无级调节。

头部自动阀门包括阀门位置指示器。

两个自动机头阀门上都有内置的气动联锁装置。

两个自动机头阀上都有内部互锁装置。

树脂凝胶报警系统（RGA）。

预先确定的计数器（PDC），计数率为每100cc。

模压保护器（MPG）。

完整的仪表和控制面板。

凝胶定时器，带有报警和报警音量控制。

紧急停止，空气故障机器关闭，复位时安全自动重新启动。

设计用于连接和控制多个辅助设备。

MKVI RTM系统

手动头聚酯、环氧和酚醛。

完整的双流混合头，带有标准的静态混合元件

手动树脂和催化剂再循环头，带有手动阀门互锁功能

重型比例臂

100cc的初级树脂泵，带有进口软管和过滤器，适合200kdrum。

完整的仪表和控制面板，安装在可上锁的钢柜中

MPG, 模具压力保护装置

RGA, 树脂胶报警器

机器头的定时溶剂冲洗（取消RGA）。

设计用于连接和控制。

Turbo Autosprue - 自动注射阀。

IVx3 - 3位注射阀

气动PV传感器（PPVS） - 用于精确的模具压力控制

英文介绍

Available in varying configurations for polyester, phenolic, and epoxy resins ideal for advanced closed mold applications

The MkVI RTM System comes in three configurations: polyester, phenolic, and epoxy resins. This unit is ideal for advanced closed mold applications. These systems come with multiple pump options based on the material used.

Suitable for mixing and injecting Polyester, Vinylester, Methacrylate and Epoxy resin systems.

Catalyst ratio can be infinitely adjusted from 1.0% to 50%.

Head auto valves include valve position indicators.

Built in pneumatic interlocks on both auto head valves.

Internal interlocks on both auto head valves.

Resin Gel Alarm system (RGA).

Pre-determined counter (PDC), with a count rate of every 100cc.

Mold Pressure Guard (MPG).

Full instrumentation and control panel.

Gel timer with alarm and alarm volume control.

Emergency stop, air failure machine shutdown with safe automatic restart on reset.

Designed to connect to and control multiple ancillaries.

MKVI RTM System

Manual head polyester, epoxy and phenolic:

Complete 2 stream mixing head with standard static mixer element

Manual Resin and Catalyst re-circulation at head with manual valve interlocks

Heavy-duty ratio arms

100cc Primary Resin Pump with inlet hose and filter suitable for a 200kdrum

Full instrumentation and control panel, housed in steel lockable cabinet

MPG, Mould Pressure Guard

RGA, Resin Gel Alarm

Timed solvent flush of machine head (cancels RGA)

Designed to connect to and control:

Turbo Autosprue – Automatic injection valve.

IVx3 – 3-Position Injection Valve

Pneumatic PV Sensor (PPVS) – For precise mold pressure control