产品简介

爱国者切割/浇注系统具有前所未有的精度、功率、多功能性和坚固的结构，可长期使用，快速访问设计（RAD）便于维护，性能可靠。爱国者切割/浇注系统采用高精度的爱国者技术和模块化的多功能性设计，以最小的过喷量制造优质零件，并大大减少材料浪费。

由于催化剂与树脂之间的差异率为1%或更小，爱国者切碎系统大大改进了竞争系统，经测试，其差异率为25%-30%。高效玻璃钢生产的关键是实现均匀的层压板。精确的计量将纠正许多质量问题，如孔隙率、厚度不一致。

爱国者切割/浇注系统的特点是流体部分经过深度感应热硬化，然后涂上厚厚的硬铬层，以增加系统的磨损特性，使其能够运行更长的时间。

爱国者的设计和制造采用了模块化组件，以创造符合您需求的最佳配置。利用快速更换部件延长了系统的寿命，并允许减少停机时间。主要部件的更换在10分钟以内完成。爱国者的流体部分和催化剂泵都采用了新的 "自愈 "密封，具有当今最低的摩擦系数。这种密封不需要调整填料，并大大减少了与热积聚和磨损有关的问题。

标准容量系统

输出能力。高达15磅/分钟。(6.8 kg/min.) ，取决于材料和应用

催化剂百分比：0.75%至2.5%（使用PAT-CP 0980）1%至3.4%（使用PAT-CP 1530）。

英文介绍

The Patriot Chop/Wetout system delivers unprecedented precision, power, versatility and rugged construction for long lasting use, rapid access design (RAD) for easy maintenance, and reliable performance. The Patriot Chop/Wetout system is designed with highly accurate Patriot technology and modular versatility to make quality parts with minimal overspray and greatly reduce material waste.

With a catalyst-to-resin variance ratio of 1% or less, the Patriot chop system greatly improves upon competitive systems with tested with variance ratios of 25% – 30%. The key to efficient FRP production is achieving a uniform laminate. Precise metering will correct many of the quality issues, such as porosity, inconsistent thickness.

The Patriot Chop/Wetout System features a deep induction heat hardened Fluid Section which is then coated with a thick hard chrome layer to increase the wear characteristics of the system, allowing it to run for longer periods.

Patriot is designed and built with modular components to create the optimum configuration for your needs. Utilizing quick-change components extends the system life and allows for reduced down time. The major components change out in 10 minutes or less. Both the Fluid Section and Catalyst Pump on Patriot feature the new “self-healing” seal that has the lowest coefficients of friction available today. This seal does not require packing adjustments, and greatly reduces the problems associated with heat buildup and wear.

STANDARD VOLUME SYSTEM

Output Capabilities: Up to 15 lbs./min. (6.8 kg/min.) depending on materials & application

Catalyst percentage: 0.75% to 2.5% by volume (with PAT-CP 0980) 1% to 3.4% (with PAT-CP 1530)