产品简介

5加仑型号有自调平平台和单动力头，使材料保持在同一水平上，可以正确分配1：1混合比例的材料。该系统的输出能力有助于寻求处理小批量和中等数量的材料的用户。55加仑型号是需要大量精确混合材料的制造商的理想选择。两个切分检查流体部分将材料输送到一个计量泵，然后再输送到涂抹枪。产量稳定，能够经受住最苛刻的生产设施。

5加仑

输出能力：大约1磅/分钟-4磅/分钟（.45千克/分钟-1.8千克/分钟）

空气消耗：25-30 CFM（0.7 - 0.9 m^3/min）。

混合比：1:1（按体积计算

可用的泵比：23:1

最大空气输入压力：100 psi (7 bar)

英文介绍

The 5-gallon model has self-leveling platforms and single power head keep material at the same level allowing proper dispensing of 1:1 mix ratio materials. Output capabilities of this system help users looking to process materials in both small and medium quantities. The 55-gallon models are ideal for manufacturers needing accurately mixed materials in large quantities. Two chop check fluid sections transfer material to one metering pump and then the applicator gun. The output is consistent and capable of enduring the most demanding production facilities.

5-GALLON

Output Capabilities: approximately 1 lb/min – 4 lbs/min (.45kgs/min – 1.8 kgs/min)

Air Consumption: 25-30 CFM (0.7 – 0.9 m^3/min)

Mix Ratio: 1:1 by volume

Available Pump Ratio: 23:1

Max Air Input Pressure: 100 psi (7 bar)