水上物流网为船舶与海洋工程行业提供技术支持与动力,是船舶行业最大门户分类网站
全国: | 上海:
水上物流产品分类
漂浮式模块浮桥模块
产品图片
重要参数
    技术参数 漂浮式模块

产品简介

奥托系统的主要元素是:

双立方体(100x50x40cm)
单立方体(50x50x40cm)
连接器
螺钉螺母
双垫片
所有的立方体在角落(双还在中间)一些点范围从 1 到 4,其中 1 是最高和最低 4,它们服务于 指示槽的高度。

要组装,立方体必须全部安装在同一侧的阀门。

如果插槽不相互接触,插入垫片,以便将立方体连接在一起。

为了固定立方体,连接器插入插槽,并用适当的键旋转 45°。 要固定外围,必须使用带螺母的螺丝。

英文介绍

The main elements of Otto system are:

Double cubes (100x50x40cm)
Single cubes (50x50x40cm)
Connectors
Screws with nuts
Double spacers
All the cubes have in the corners (the double also in the middle) some dots ranging from 1 to 4, where 1 is the tallest and the lowest 4, they serve to indicate the height of the slots.

To be assembled, the cubes must all be fitted with the valve on the same side.

Where the slots do not touch each other, insert the spacer so the cubes are joined together.

To secure the cubes, the connectors are inserted into the slots and rotated by 45° with the appropriate key. To fix the outer perimeter, the screws with nut must be used.