水上物流网为船舶与海洋工程行业提供技术支持与动力,是船舶行业最大门户分类网站
全国: | 上海:
水上物流产品分类
漂浮式柚木船用浮桥(重型游艇码头)
产品图片
重要参数
    类型 漂浮式
    用途 系泊
    应用 用于海港, 船用, 用于港口
    材料 柚木
    其他特性 重载荷
    长度 最多: 12.4 m(40'08" )
    最少: 6.4 m(20'11" )
    宽度 2.4 m, 2.7 m, 3.2 m
    (7'10" , 8'10" , 10'05" )
    干舷 60 cm(24 in)

产品简介

马天尼游艇码头专门为重型船舶停泊设计了一系列极为坚固的码头。

事实上,每一个施工细节的设计都是为了保证即使在最复杂的气象条件下,也能获得最大的耐受性、安全性和可靠性。

坚固 320、坚固 270、坚固 240:
宁静的保证
所有马天尼游艇码头的浮动模块都是根据 AIPCN 的游艇码头规定制造的。
Martini Alfredo S.p.A. 码头的设计可安装高密度聚乙烯(HDPE)或不锈钢基座(水/灯)。

钢架由 IPE 240 横梁、UNP 240 封头、横向型材和斜加劲横梁组成。

每个框架都配有吊环螺栓,由直径为 35 毫米的实心钢杆组成,所有吊环螺栓都经过热浸镀锌处理,以防止海洋腐蚀,符合 EN ISO 1461 标准。

由聚烯烃树脂制成的浮动元件可确保浮力,浮动模块的长边配有双排黑色防震聚烯烃树脂制成的护舷,以免弄脏船舷。

连接钢膝的破坏强度为 790 千牛(80 吨),是浮动模块之间的连接部件。

英文简介

A series of extreme robust piers, expressly designed by Martini Marinas for heavy-duty boat mooring.

In fact, every construction detail is designed to guarantee maximum resistance, safety and reliability even in the most complex meteorological situations.

STRONG 320, STRONG 270, STRONG 240:
GUARANTEE OF TRANQUILITY
All Martini Marinas floating modules are made according to the AIPCN regulation for the pleasure harbours.
Martini Alfredo S.p.A. jetties are designed with provision for the installation of HDPE or stainless steel pedestals (water/light).

The steel frame consists of IPE 240 beams, UNP 240 heads, transversal profiles and diagonal stiffening crossbeams.

Each frame is equipped with eyebolts, consisting of Ø 35 mm dia. solid steel rod, all properly protected from the marine corrosion by hot dip zinc-plated process in compliance with EN ISO 1461 standard.

Floating elements made of polyolefin resin ensure flotation and the floating modules are equipped with double rows of fenders on the long sides made of shockproof polyolefin resin in black so as not to foul the sides of the boats.

Joint steel knees with 790 kN (80 tons) failure strength act as a joining element between the floating modules.