水上物流产品分类
-
豪华私人船，多设施，旅行探险
-
快速水上运动艇，多用途
-
利用风力的船，多种用途
-
设备多样，功能全面
-
多样刺激，乐趣无限
-
船只停靠的场所，设施齐备
滚塑聚乙烯半浮标（下锚系泊浮标）
产品图片
重要参数
| 类型 | 下锚 |
产品简介HIGHBUOYS有两种选择：HB1250 "高颈 "和HB580 "盘顶"。这两种设计都是由两个高质量的、坚固的滚塑聚乙烯半浮标用螺栓连接而成。分体式设计提供了两个独立的、完全封闭的腔体，大大增加了浮力的完整性，并消除了对额外的内部发泡的需要。直接连接 "的设计使人们可以立即接触到实际的停泊线，而不需要把任何湿的、脏的或重的东西拖出水面。 碟顶HIGHBUOY。 HIGHBUOY系泊浮标的设计是通过一个整体的重型菱形卸扣板来提供与顶部系泊线和链条的直接连接。 分体式设计提供了两个独立的浮力室，提供剩余的浮力和完整性，而不需要额外的发泡。互锁的浮筒部分减少了所需的紧固件数量，这反过来又为停泊线、卸扣和旋转装置提供了方便。 超强韧性的滚塑聚乙烯外壳 独特的双浮力室设计 双室设计不仅提供了卓越的浮力，而且还便于维护和检查。 强大的集成直接系泊点 系泊线直接连接到坚固的下底板上，因此不需要将任何东西拖出水面。 系泊线抗磨损轴承 顶部的系泊线可以在绳道内旋转，并使用超强的低摩擦HDPE轴承（选择槽式或孔式轴承）来保护其免受磨损。 内部钓具室 卸扣、顶针、接头和转轴都可以根据需要使用，并在内部钓具室中得到保护。 英文介绍HIGHBUOYS come in two options: the HB1250 “high neck”; and the HB580 “dish top”. Both designs consist of two high quality, tough roto moulded Polyethylene half buoys bolted together. The split design provides two independent, fully enclosed chambers greatly increasing buoyancy integrity and removes the need for additional internal foaming.The “direct connect” design gives instant access to the actual mooring line without any need to haul anything wet, dirty or heavy out of the water. Dish Top HIGHBUOY. HIGHBUOY mooring buoys have been designed to provide direct connection to the top mooring line and chain via an integral heavy duty diamond shackle plate. The split design provides two independent buoyancy chambers providing residual buoyancy and integrity without the need for additional foaming. Interlocking float sections reduce the number of fasteners required which in turn provides easy access to mooring lines, shackles and swivels. SUPER TOUGH ROTO-MOULDED POLYETHYLENE SHELL UNIQUE DOUBLE BUOYANCY CHAMBER DESIGN The double chamber design not only provides superior buoyancy but also allows for easy access for maintenance and checks STRONG INTEGRATED DIRECT MOORING POINT The mooring line is directly connected to the strong lower base plate therefore there is no need to haul anything out of the water MOORING LINE ANTI-WEAR BEARING The top mooring line can rotate in the rope channel and is protected from wear using super tough low friction HDPE bearing (choice of slot or hole type bearing) INTERNAL TACKLE CHAMBER Shackles, thimbles, splices and swivels can all be utilised as required and protected within the internal tackle chamber |
| 上一篇：高级聚乙烯制系泊浮标 | 下一篇：塑料下锚系泊浮标 |
推荐信息
| 高质量重型侧卸车（侧移式升降机） |
2023-10-17
|
查看详情 >> |
| 船用搬运千斤顶（微型电动履带运输车） |
2023-11-25
|
查看详情 >> |
| 水产养殖下锚 |
2023-12-12
|
查看详情 >> |
| 高密度的漂浮式模块 |
2024-01-23
|
查看详情 >> |
| 电动船坞牵引拖车 |
2023-11-02
|
查看详情 >> |