用途 | 搬运, 下水 |
应用 | 船用, 船坞 |
车轴数量 | 单车轴 |
其他特性 | 液压 |
有效载荷 | 最多: 10 t (11.02 us ton) 最少: 0 t (0 us ton) |
整体长度 | 8.2 m (26'10") |
整体宽度 | 2.2 m (7'02") |
提升高度 | 最多: 1.7 m (5'07") 最少: 0.7 m (2'03") |
产品简介框架 高等级S355钢,开放式U型设计轮子,4个充气轮胎或4个实心轮胎。 拉杆,可延长1.0米。 垫子,2个聚氨酯垫子930x320毫米。 高质量的液压缸,内置安全阀。 油漆系统,2层环氧底漆和2层双组分面漆,RAL颜色。 Hydrotrans液压SW系列船用拖车设计用于在滑道上发射和回收船只,在陆地上运输船只,并将其停放在仓库或工作区。Hydrotrans SW10可以由叉车,或农业拖拉机拉动。它利用牵引车辆的液压能力来实现所有的液压功能。船只由2个,或可选4个液压或机械垫抬起,上面有耐用的橡胶垫,以避免损坏船体。船的前面由横梁支撑,横梁上也有橡胶垫以避免损坏。对于帆船有一个适配器,对于双体船也有一个适配器可供选择。拖车框架的宽度和高度可以调节。垫子和拉杆可以手动或液压调节。 Hydrotrans SW系列拖车也适用于运输T型架上的船只。采用实心轮胎或充气轮胎,SW拖车在任何能够承载的地形上都能提供最佳的舒适性。 Hydrotrans SW拖车是根据CE法规制造的,并在装运前在工厂进行了测试。 所有Hydrotrans设备都可以按照SAE的规格制造。 垫子上的高度,750毫米。 前面的高度,430毫米。 垫子中心的距离,1200-2000。 提升高度框架,700毫米。 提升高度的垫子,400毫米。 英文简介Frame High Grade S355 Steel, open U designWheels, 4 pneumatic or 4 solid tires. Drawbar, 1,0 mtr. extendable. Pads, 2 polyurethane pads 930x320 mm. High quality hydraulic cylinders with safety valves built-in. Paint system, 2 coats epoxy primer and 2 coat 2 component topcoat, RAL color. The Hydrotrans hydraulic SW series boat trailer is designed to launch and recover boats on a slipway, transport the boats over land and park them in storage or work area. The Hydrotrans SW10 can be pulled by a forklift, or an agricultural tractor. It uses the hydraulic capacity of the tow vehicle for all the hydraulic functions. The boat is lifted by 2, or with an optional 4, hydraulic or mechanical pads with durable rubber pads on them to avoid damaging the hull. The front of the boat is supported by the crossbeam also with a rubber pad on it to avoid damage. For sailboats an adaptor is available, and an adaptor for catamarans is also available. The width of the trailer frame and the height are adjustable. The pads and drawbar are manually or hydraulically adjustable. The Hydrotrans SW series trailers are also suitable for transporting boats on T-cradle’s. With solid or pneumatic tires, the SW trailer offers optimal comfort through any terrain capable of carrying the load. The Hydrotrans SW trailers are built according to CE-regulations and are tested at the factory before shipment. All Hydrotrans equipment can be built to SAE specifications. Height on pads, 750 mm. Height on front, 430 mm. Distance between centre of pads, 1200-2000. Lifting height frame, 700 mm. Lifting height pads, 400 mm. |
高质量重型侧卸车(侧移式升降机) |
2023-10-17
|
查看详情 >> |
船用搬运千斤顶(微型电动履带运输车) |
2023-11-25
|
查看详情 >> |
水产养殖下锚 |
2023-12-12
|
查看详情 >> |
高密度的漂浮式模块 |
2024-01-23
|
查看详情 >> |
电动船坞牵引拖车 |
2023-11-02
|
查看详情 >> |